
How to use it
The routine
Tires have to be clean and dry before anything goes on them. Applied over road film, the coating will not hold.
01
Spray 2–3 pumps onto a foam tire applicator.
02
Apply evenly over clean, dry tires or plastic trim.
03
Level the coating with smooth, even strokes.
04
Apply additional coats for a richer finish.
- Sizes
- 8 oz · 16 oz · 1 Gal
- Dry time
- Under 5 minutes
- Finish
- Deep black satin
- Sling
- None
Where it works
Surfaces
Trailer tires
Plastic fenders
Wheel wells
Trim
Hard plastics
Not sure about a surface on your boat? Ask us before you spray.
From the shop
Get more out of it
Clean and dry firstWash the tires with Scrub Down and let them dry. Coating over road film is why dressings streak and fail early.
Two thin coatsLevel each one. Two light passes build a deeper satin than one heavy coat, and neither will sling.
Let it flash before you towFive minutes is enough to dry to the touch. Load the boat after that and nothing transfers.
The complete Drift system
Scrub Down
High foaming wash concentrate
View product
Marine Mist
Daily cleaner & detailer
View product
Graphene Ultra Shine
Graphene ceramic spray coating
View product