
How to use it
The routine
The foam does the work. Give it time to lift the grit off the surface before anything touches the gelcoat.
01
Add 2–4 oz to a 5-gallon wash bucket, or use your foam cannon manufacturer’s recommended dilution.
02
Fill with water to generate thick foam.
03
Wash using a microfiber mitt, sponge, or soft wash brush.
04
Rinse thoroughly with fresh water before the soap dries.
- Sizes
- 16 oz · 32 oz · 1 Gal
- Dilution
- Up to 200:1
- Bucket dose
- 2–4 oz per 5 gal
- Formula
- Biodegradable
Where it works
Surfaces
Gelcoat
Fiberglass
Metal
Trailers
Wheels
Tires
Not sure about a surface on your boat? Ask us before you spray.
From the shop
Get more out of it
Two bucketsOne for soap, one to rinse the mitt. Everything you rinse out is grit that would otherwise go back on the hull.
Top downWork from the hardtop to the waterline so runoff never carries dirt across panels you already washed.
Never let it dryRinse each section before the sun does. Dried soap is what leaves the spots you then have to remove.
The complete Drift system
Marine Mist
Daily cleaner & detailer
View product
Mineral Mist+
Water spot remover & sealant
View product
Tread Defend
Tire & plastic UV protectant
View product